U017E Diagnostic Trouble Code


U017E is a kind of OBD-II Diagnostic U-Network Diagnostic Trouble Code.

It is considered generic because it applies to all makes and models of vehicles, although specific repair steps may be different depending on your car model.

Symptoms

Symptoms of a U017E diagnostic trouble code may include:
  • If the DPF is not cleared the ECU will revert to the "Limp Home Mode" until the situation is corrected
  • Corroded or damaged connector
  • Reduction in engine performance, especially at low RPM levels
  • The light may stay on or light intermittently as the DPF regenerates. The engine will be sluggish on acceleration.
Place of U017E in engine

Possible Causes :

  • An air leak forward of the DPF will change the sensor readings resulting in the code
  • Rusty exhaust systems, cracked exhaust manifolds or damaged or missing gaskets or donuts will cause air leaks.
  • Fuel with a large percentage of sulfur will clog the DPF quickly

Repair Processes :

It should be pretty close to battery voltage (12 volts). If not, then this is the circuit that has the problem. If the engine displays a miss and there wasn't a code, determine which cylinder is misfiring. If the exhaust manifold is visible, spay or pour a small amount of water on each cylinder exhaust port. Water will evaporate immediately on good cylinders and slowly on the missing cylinder. If this can't be accomplished pull the plugs and check the condition. Find out what kind of system you have and verify that voltage to the fuel level sensor is present at the fuel pump wiring harness.

Process Tips

Diagnostic trouble code U017E is not difficult to diagnose and repair. Thus, it always pays to have a qualified technician to look after your vehicle should this error code arise.

Diagnosing this code requires the engine to be in good running shape, without unmetered air entering the engine. If other codes that relates to misfiring condition, lean running or air entering the engine is present, then you must first fix those error codes before U017E.

Fortunately, U017E is a fairly common OBD code, meaning that it applies to all makes and models of vehicles made after 1996.

P1205 Trouble Code For Specific Cars

Diagnostic Trouble Code look-up and check engine light code viewer.

Copyright 2019 - https://diagnosticTrouble.com

Small Logo