U0174 Smart Crossblade Diagnostic Trouble Code

U0174 Smart Crossblade code definition:
U0174 is a kind of OBD-II Diagnostic U-Network Diagnostic Trouble Code for Smart Crossblade.

U0174 Smart Crossblade or the Evaporative Emission Control System Incorrect Purge Flow is the set whenever the computer sees that there is a problem with the flow coming from the purge valve or the purge flow is not enough within the EVAP system. There are two wires dedicated for each coil; one is battery feed which usually comes from the distribution center, and the other one for the coil driver circuit from the PCM. The PCM grounds or ungrounds the circuit to activate or deactivate the coil.

Symptoms

Symptoms of a U0174 Smart Crossblade diagnostic trouble code may include:
  • Faulty PCM
  • The light may stay on or light intermittently as the DPF regenerates. The engine will be sluggish on acceleration.
  • Poor acceleration
  • If the DPF is not cleared the ECU will revert to the "Limp Home Mode" until the situation is corrected
Place of U0174 in engine

Possible Causes :

  • Fuel with a large percentage of sulfur will clog the DPF quickly
  • The Mass Airflow sensor will also cause this problem. Mass Airflow circuit malfunction.
  • A large air leak at or near the number one oxygen sensor would also cause a lean mixture.

Common Misdiagnoses

  1. IC Circuit High Voltage Problem
  2. Control Module Throttle Actuator Position Performance Problem
  3. Air Conditioning (A/C) Clutch Feedback Circuit High Voltage Problem
  4. Cruise Vehicle Speed/Set Speed Difference Too High Problem
  5. PCM Stack Overrun Problem

Repair Processes :

Look for damage to the tank indicating impact that may have damaged the fuel pump or sender. Now, clear the codes and test-drive the vehicle to see if the code is reset.

Process Tips

Diagnostic trouble code U0174 Smart Crossblade is not difficult to diagnose and repair. Thus, it always pays to have a qualified technician to look after your vehicle should this error code arise.

Diagnosing this code requires the engine to be in good running shape, without unmetered air entering the engine. If other codes that relates to misfiring condition, lean running or air entering the engine is present, then you must first fix those error codes before U0174 Smart Crossblade.

Fortunately, U0174 Smart Crossblade is a fairly common OBD code, meaning that it applies to all makes and models of vehicles made after 1996.

Diagnostic Trouble Code look-up and check engine light code viewer.

Copyright 2021 - https://diagnosticTrouble.com

Small Logo