U010B Toyota ES Diagnostic Trouble Code

U010B Toyota ES code definition:
U010B is a kind of OBD-II Diagnostic U-Network Diagnostic Trouble Code for Toyota ES.

U010B Toyota ES is described as Fuel Rail Pressure Sensor Circuit Malfunction. This code is strictly about the incoming signal from the FRP (fuel rail pressure) sensor falling below the calibrated limit for a certain period of time. There are two wires dedicated for each coil; one is battery feed which usually comes from the distribution center, and the other one for the coil driver circuit from the PCM. The PCM grounds or ungrounds the circuit to activate or deactivate the coil.

Symptoms

Symptoms of a U010B Toyota ES diagnostic trouble code may include:
  • Diminished fuel efficiency
  • Fuel pressure too high
  • Malfunction Indicator Lamp (MIL) illuminated
  • Rich or lean exhaust
Place of U010B in engine

Possible Causes :

  • The Mass Airflow sensor will also cause this problem. Mass Airflow circuit malfunction.
  • Fuel with a large percentage of sulfur will clog the DPF quickly
  • Faulty IMRC actuator/sensor

Common Misdiagnoses

  1. IC Circuit High Voltage Problem
  2. Control Module Throttle Actuator Position Performance Problem
  3. Air Conditioning (A/C) Clutch Feedback Circuit High Voltage Problem
  4. Cruise Vehicle Speed/Set Speed Difference Too High Problem
  5. PCM Stack Overrun Problem

Repair Processes :

Find out what kind of system you have and verify that voltage to the fuel level sensor is present at the fuel pump wiring harness. Replace the oxygen sensor that is downstream from the catalytic converter on the side of the engine that does not contain cylinder #1. Also, if a oxygen sensor code stating "heater circuit malfunction" the sensor has most probably failed. Pack the connector cavity with dielectric silicone compound (same stuff they use for light bulb sockets and spark plug wires) and reassemble.

Process Tips

Diagnostic trouble code U010B Toyota ES is not difficult to diagnose and repair. Thus, it always pays to have a qualified technician to look after your vehicle should this error code arise.

Diagnosing this code requires the engine to be in good running shape, without unmetered air entering the engine. If other codes that relates to misfiring condition, lean running or air entering the engine is present, then you must first fix those error codes before U010B Toyota ES.

Fortunately, U010B Toyota ES is a fairly common OBD code, meaning that it applies to all makes and models of vehicles made after 1996.

Diagnostic Trouble Code look-up and check engine light code viewer.

Copyright 2020 - https://diagnosticTrouble.com

Small Logo