P20AF Diagnostic Trouble Code
P20AF is a kind of OBD-II Diagnostic P-Powertrain Diagnostic Trouble Code.
It is considered generic because it applies to all makes and models of vehicles, although specific repair steps may be different depending on your car model.
Symptoms
Symptoms of a P20AF diagnostic trouble code may include:
- Faulty or damaged wiring
- The engine oil will exhibit dilution from the ECUs attempts to increase engine temperature. Some vehicles advance the fuel injection timing slightly after top center to afterburn a small amount of fuel to increase exhaust temperatures. Some of this fuel enters the crankcase. When the ECU determines the necessity to regenerate the DPF, the service life of the oil be shortened significantly
- Poor fuel economy
- Hesitation upon acceleration
|
Possible Causes :
- Some aftermarket accessories and performance modifications
- A faulty oxygen sensor. This will set a code in itself, however, a faulty oxygen sensor does not automatically condemn the sensor. The code just means that the sensor signal was not within specifications. An air leak or any of the above will cause an erroneous signal. There is a multitude of O2 codes relating to O2 performance which gives a clue to the problematic area.
- A large vacuum leak would cause a massive amount of un-metered air to enter the intake manifold resulting in an overly lean mixture.
|
Repair Processes :
Replace the oxygen sensor that is downstream from the catalytic converter on the side of the engine that does not contain cylinder #1. Also, if a oxygen sensor code stating "heater circuit malfunction" the sensor has most probably failed.
With the valve disconnected, the red voltmeter lead should be attached to the IMRC valve power wire and the black voltmeter lead connected to ground.
Look for rubbing, scraping, bare wires, worn spots or melted plastic connectors. Pull the connectors apart and carefully look at the terminals (the metal parts) inside the connectors.
Process Tips
Diagnostic trouble code P20AF is not difficult to diagnose and repair. Thus, it always pays to have a qualified technician to look after your vehicle should this error code arise.
Diagnosing this code requires the engine to be in good running shape, without unmetered air entering the engine. If other codes that relates to misfiring condition, lean running or air entering the engine is present, then you must first fix those error codes before P20AF.
Fortunately, P20AF is a fairly common OBD code, meaning that it applies to all makes and models of vehicles made after 1996.
P20AF Trouble Code For Specific Cars
Diagnostic Trouble Code look-up and check engine light code viewer.
About Us | Contact | Privacy
Copyright 2024 - https://DiagnosticTrouble.com