P018F Lotus Eclat Diagnostic Trouble Code
P018F Lotus Eclat code definition:
P018F is a kind of OBD-II Diagnostic P-Powertrain Diagnostic Trouble Code for Lotus Eclat.
P018F Lotus Eclat is described as Fuel Rail Pressure Sensor Circuit Malfunction. This code is strictly about the incoming signal from the FRP (fuel rail pressure) sensor falling below the calibrated limit for a certain period of time. As you drive and when specific conditions are slowly met, the vapors will gradually purge from the charcoal canister and will get burned within your engine.
Symptoms
Symptoms of a P018F Lotus Eclat diagnostic trouble code may include:
- Cherry red hot catalytic converter
- Poor acceleration
- The light may stay on or light intermittently as the DPF regenerates. The engine will be sluggish on acceleration.
- Reduction in engine performance, especially at low RPM levels
|
Possible Causes :
- A faulty oxygen sensor. This will set a code in itself, however, a faulty oxygen sensor does not automatically condemn the sensor. The code just means that the sensor signal was not within specifications. An air leak or any of the above will cause an erroneous signal. There is a multitude of O2 codes relating to O2 performance which gives a clue to the problematic area.
- Some aftermarket accessories and performance modifications
- An air leak forward of the DPF will change the sensor readings resulting in the code
|
Common Misdiagnoses
- IC Circuit High Voltage Problem
- Control Module Throttle Actuator Position Performance Problem
- Air Conditioning (A/C) Clutch Feedback Circuit High Voltage Problem
- Cruise Vehicle Speed/Set Speed Difference Too High Problem
- PCM Stack Overrun Problem
Repair Processes :
With the valve disconnected, the red voltmeter lead should be attached to the IMRC valve power wire and the black voltmeter lead connected to ground.
Now, clear the codes and test-drive the vehicle to see if the code is reset.
Look at the plug wires to make sure they are not burnt or laying on the exhaust.
Process Tips
Diagnostic trouble code P018F Lotus Eclat is not difficult to diagnose and repair. Thus, it always pays to have a qualified technician to look after your vehicle should this error code arise.
Diagnosing this code requires the engine to be in good running shape, without unmetered air entering the engine. If other codes that relates to misfiring condition, lean running or air entering the engine is present, then you must first fix those error codes before P018F Lotus Eclat.
Fortunately, P018F Lotus Eclat is a fairly common OBD code, meaning that it applies to all makes and models of vehicles made after 1996.
Diagnostic Trouble Code look-up and check engine light code viewer.
About Us | Contact | Privacy
Copyright 2024 - https://DiagnosticTrouble.com
![Small Logo](https://diagnostictrouble.com/images/logo.png)