P0041 Westfield Zei Diagnostic Trouble Code
P0041 Westfield Zei code definition:
P0041 is a kind of OBD-II Diagnostic P-Powertrain Diagnostic Trouble Code for Westfield Zei.
P0041 Westfield Zei is defined as Camshaft Position Sensor A Circuit Low. This means the CMP (camshaft position) sensor circuit on engine bank 1 sends an irregular reading. There are two wires dedicated for each coil; one is battery feed which usually comes from the distribution center, and the other one for the coil driver circuit from the PCM. The PCM grounds or ungrounds the circuit to activate or deactivate the coil.
Symptoms
Symptoms of a P0041 Westfield Zei diagnostic trouble code may include:
- The light may stay on or light intermittently as the DPF regenerates. The engine will be sluggish on acceleration.
- Faulty PCM
- If the DPF is not cleared the ECU will revert to the "Limp Home Mode" until the situation is corrected
- Reduction in engine performance, especially at low RPM levels
|
Possible Causes :
- A faulty oxygen sensor. This will set a code in itself, however, a faulty oxygen sensor does not automatically condemn the sensor. The code just means that the sensor signal was not within specifications. An air leak or any of the above will cause an erroneous signal. There is a multitude of O2 codes relating to O2 performance which gives a clue to the problematic area.
- Some aftermarket accessories and performance modifications
- An air leak forward of the DPF will change the sensor readings resulting in the code
|
Common Misdiagnoses
- Control Module Throttle Actuator Position Performance Problem
- Air Conditioning (A/C) Clutch Feedback Circuit High Voltage Problem
- Cruise Vehicle Speed/Set Speed Difference Too High Problem
- Kick-Down Switch Failed Short Problem
- Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit Problem
Repair Processes :
Look for missing ground strap or a rusty ground where the fuel tank is grounded to the frame. Check for damage to the wiring harness connector.
Use the DVOM to test resistance and continuity on all system circuits if actuator and sensor resistance levels are in compliance with manufacturer's specifications.
Process Tips
Diagnostic trouble code P0041 Westfield Zei is not difficult to diagnose and repair. Thus, it always pays to have a qualified technician to look after your vehicle should this error code arise.
Diagnosing this code requires the engine to be in good running shape, without unmetered air entering the engine. If other codes that relates to misfiring condition, lean running or air entering the engine is present, then you must first fix those error codes before P0041 Westfield Zei.
Fortunately, P0041 Westfield Zei is a fairly common OBD code, meaning that it applies to all makes and models of vehicles made after 1996.
Diagnostic Trouble Code look-up and check engine light code viewer.
About Us | Contact | Privacy
Copyright 2024 - https://DiagnosticTrouble.com
![Small Logo](https://diagnostictrouble.com/images/logo.png)