C2809 Lombard Al-3 Diagnostic Trouble Code

C2809 Lombard Al-3 code definition:
C2809 is a kind of OBD-II Diagnostic C-Chassis Diagnostic Trouble Code for Lombard Al-3.

C2809 Lombard Al-3 is triggered when the bank 1 camshaft position sensor doesn't match the signal from the crankshaft position sensor. The PCM then uses this data to provide the right strategies for the fuel delivery and ignition timing of the engine.

Symptoms

Symptoms of a C2809 Lombard Al-3 diagnostic trouble code may include:

Reduction in engine performance, especially at low RPM levels
Vacuum leak on the engine
Diminished fuel efficiency
Rich or lean exhaust

Possible Causes :

The Mass Airflow sensor will also cause this problem. Mass Airflow circuit malfunction.
Fuel with a large percentage of sulfur will clog the DPF quickly
Dirty air cleaner element Damaged DPF

Common Misdiagnoses

TP Sensor Learn Not Complete Problem
Low Coolant Circuit Problem
Cruise Control System - Vehicle Accel Too High Problem
TFP Valve Position Switch-Drive Without Drive Ratio Problem
Problem

Repair Processes :

Find out what kind of system you have and verify that voltage to the fuel level sensor is present at the fuel pump wiring harness. Look at the plug wires to make sure they are not burnt or laying on the exhaust. It should be pretty close to battery voltage (12 volts). If not, then this is the circuit that has the problem.

Process Tips

Diagnostic trouble code C2809 Lombard Al-3 is not difficult to diagnose and repair. Thus, it always pays to have a qualified technician to look after your vehicle should this error code arise.

Diagnosing this code requires the engine to be in good running shape, without unmetered air entering the engine. If other codes that relates to misfiring condition, lean running or air entering the engine is present, then you must first fix those error codes before C2809 Lombard Al-3.

Fortunately, C2809 Lombard Al-3 is a fairly common OBD code, meaning that it applies to all makes and models of vehicles made after 1996.