B2A37 Mercedes-Benz B+class Diagnostic Trouble Code

B2A37 Mercedes-Benz B+class code definition:
B2A37 is a kind of OBD-II Diagnostic B-Body Diagnostic Trouble Code for Mercedes-Benz B+class.

B2A37 Mercedes-Benz B+class is defined as Camshaft Position Sensor A Circuit Low. This means the CMP (camshaft position) sensor circuit on engine bank 1 sends an irregular reading. If the car doesn't start, they will proceed by testing the voltage at the fuel pump connector and see if the fuel pump relay, fuse, and PCM circuitry should be inspected.

Symptoms

Symptoms of a B2A37 Mercedes-Benz B+class diagnostic trouble code may include:
  • If the DPF is not cleared the ECU will revert to the "Limp Home Mode" until the situation is corrected
  • Corroded or damaged connector
  • Reduction in engine performance, especially at low RPM levels
  • The light may stay on or light intermittently as the DPF regenerates. The engine will be sluggish on acceleration.
Place of B2A37 in engine

Possible Causes :

  • Low fuel pressure caused by a clogged filter, failing fuel pump, failed fuel pressure regulator or clogged or leaking injectors.
  • Low fuel pressure caused by a clogged filter, failing fuel pump, failed fuel pressure regulator or clogged or leaking injectors.
  • Fuel with a large percentage of sulfur will clog the DPF quickly

Common Misdiagnoses

  1. Vehicle Speed Output Circuit Problem
  2. Cruise Control Servo Indicates Low Problem
  3. A/C System High Pressure High Temperature Problem
  4. PCM Stack Overrun Problem
  5. Transmission Control Module Reprogrammable Memory Problem

Repair Processes :

Look for damage to the tank indicating impact that may have damaged the fuel pump or sender. If the engine displays a miss and there wasn't a code, determine which cylinder is misfiring. If the exhaust manifold is visible, spay or pour a small amount of water on each cylinder exhaust port. Water will evaporate immediately on good cylinders and slowly on the missing cylinder. If this can't be accomplished pull the plugs and check the condition. Pack the connector cavity with dielectric silicone compound (same stuff they use for light bulb sockets and spark plug wires) and reassemble.

Process Tips

Diagnostic trouble code B2A37 Mercedes-Benz B+class is not difficult to diagnose and repair. Thus, it always pays to have a qualified technician to look after your vehicle should this error code arise.

Diagnosing this code requires the engine to be in good running shape, without unmetered air entering the engine. If other codes that relates to misfiring condition, lean running or air entering the engine is present, then you must first fix those error codes before B2A37 Mercedes-Benz B+class.

Fortunately, B2A37 Mercedes-Benz B+class is a fairly common OBD code, meaning that it applies to all makes and models of vehicles made after 1996.

Diagnostic Trouble Code look-up and check engine light code viewer.

Copyright 2020 - https://diagnosticTrouble.com

Small Logo