B1903 Suzuki Sx4 S-cross Diagnostic Trouble Code

B1903 Suzuki Sx4 S-cross code definition:
B1903 is a kind of OBD-II Diagnostic B-Body Diagnostic Trouble Code for Suzuki Sx4 S-cross.

B1903 Suzuki Sx4 S-cross is triggered when the bank 1 camshaft position sensor doesn't match the signal from the crankshaft position sensor. So if the problem persists despite of your diagnosis, then you should never hesitate to take your vehicle to your dealer or to a qualified mechanic.

Symptoms

Symptoms of a B1903 Suzuki Sx4 S-cross diagnostic trouble code may include:

Misfire
Misfire
The light may stay on or light intermittently as the DPF regenerates. The engine will be sluggish on acceleration.
If the DPF is not cleared the ECU will revert to the "Limp Home Mode" until the situation is corrected

Possible Causes :

Fuel with a large percentage of sulfur will clog the DPF quickly
The Mass Airflow sensor will also cause this problem. Mass Airflow circuit malfunction.
An air leak forward of the DPF will change the sensor readings resulting in the code

Common Misdiagnoses

TP Sensor Learn Not Complete Problem
Low Coolant Circuit Problem
Cruise Control System - Vehicle Accel Too High Problem
TFP Valve Position Switch-Drive Without Drive Ratio Problem
Problem

Repair Processes :

Look for damage to the tank indicating impact that may have damaged the fuel pump or sender. If all testing has passed so far yet you still have the same code, check your scan tool and see if it can open and close the IMRC valve.

Process Tips

Diagnostic trouble code B1903 Suzuki Sx4 S-cross is not difficult to diagnose and repair. Thus, it always pays to have a qualified technician to look after your vehicle should this error code arise.

Diagnosing this code requires the engine to be in good running shape, without unmetered air entering the engine. If other codes that relates to misfiring condition, lean running or air entering the engine is present, then you must first fix those error codes before B1903 Suzuki Sx4 S-cross.

Fortunately, B1903 Suzuki Sx4 S-cross is a fairly common OBD code, meaning that it applies to all makes and models of vehicles made after 1996.