B0025 Diagnostic Trouble Code


B0025 is a kind of OBD-II Diagnostic B-Body Diagnostic Trouble Code.

It is considered generic because it applies to all makes and models of vehicles, although specific repair steps may be different depending on your car model.

Symptoms

Symptoms of a B0025 diagnostic trouble code may include:
  • If the DPF is not cleared the ECU will revert to the "Limp Home Mode" until the situation is corrected
  • Corroded or damaged connector
  • Reduction in engine performance, especially at low RPM levels
  • Malfunction Indicator Lamp (MIL) illuminated
Place of B0025 in engine

Possible Causes :

  • Dirty air cleaner element Damaged DPF
  • A plugged converter will cause of host of driveability problems as well as set this code. A severely plugged converter will result in the inability to increase rpm when under load. Look for a code such as P0421 -- catalytic converter efficiency below threshold if the converter indicating a faulty converter.
  • Fuel with a large percentage of sulfur will clog the DPF quickly

Repair Processes :

Replace the oxygen sensor that is downstream from the catalytic converter on the side of the engine that does not contain cylinder #1. Also, if a oxygen sensor code stating "heater circuit malfunction" the sensor has most probably failed. If all testing has passed so far yet you still have the same code, check your scan tool and see if it can open and close the IMRC valve. Find out what kind of system you have and verify that voltage to the fuel level sensor is present at the fuel pump wiring harness.

Process Tips

Diagnostic trouble code B0025 is not difficult to diagnose and repair. Thus, it always pays to have a qualified technician to look after your vehicle should this error code arise.

Diagnosing this code requires the engine to be in good running shape, without unmetered air entering the engine. If other codes that relates to misfiring condition, lean running or air entering the engine is present, then you must first fix those error codes before B0025.

Fortunately, B0025 is a fairly common OBD code, meaning that it applies to all makes and models of vehicles made after 1996.

P1205 Trouble Code For Specific Cars

Diagnostic Trouble Code look-up and check engine light code viewer.

Copyright 2019 - https://diagnosticTrouble.com

Small Logo