P01CD Holden Ute Diagnostic Trouble Code

P01CD Holden Ute code definition:
P01CD is a kind of OBD-II Diagnostic P-Powertrain Diagnostic Trouble Code for Holden Ute.

P01CD Holden Ute shows up when there's an electrical problem that causes the fuel volume regulator to malfunction and open. It's quite an unusual problem and likely intermittent. So if the problem persists despite of your diagnosis, then you should never hesitate to take your vehicle to your dealer or to a qualified mechanic.

Symptoms

Symptoms of a P01CD Holden Ute diagnostic trouble code may include:

Carbon Buildup on O2 Sensor
Malfunction Indicator Lamp (MIL) illuminated
Hesitation upon acceleration
Engine surge

Possible Causes :

Rusty exhaust systems, cracked exhaust manifolds or damaged or missing gaskets or donuts will cause air leaks.
An air leak forward of the DPF will change the sensor readings resulting in the code
Some aftermarket accessories and performance modifications

Common Misdiagnoses

Crankshaft Position Sensor Circuit Performance Problem
TP Sensor Learn Not Complete Problem
Low Coolant Circuit Problem
Cruise Control System - Vehicle Accel Too High Problem
Kick-Down Switch Failed Short Problem

Repair Processes :

Look at the plug wires to make sure they are not burnt or laying on the exhaust. Pack the connector cavity with dielectric silicone compound (same stuff they use for light bulb sockets and spark plug wires) and reassemble. Find out what kind of system you have and verify that voltage to the fuel level sensor is present at the fuel pump wiring harness.

Process Tips

Diagnostic trouble code P01CD Holden Ute is not difficult to diagnose and repair. Thus, it always pays to have a qualified technician to look after your vehicle should this error code arise.

Diagnosing this code requires the engine to be in good running shape, without unmetered air entering the engine. If other codes that relates to misfiring condition, lean running or air entering the engine is present, then you must first fix those error codes before P01CD Holden Ute.

Fortunately, P01CD Holden Ute is a fairly common OBD code, meaning that it applies to all makes and models of vehicles made after 1996.