B0102 Audi A3 Diagnostic Trouble Code

B0102 Audi A3 code definition:
B0102 is a kind of OBD-II Diagnostic B-Body Diagnostic Trouble Code for Audi A3.

B0102 Audi A3 is defined as Cylinder 3 Injector Circuit Malfunction. This code means the PCM (powertrain control module, also known as ECM or engine control) has detected a problem in the injector or its wiring, or in injector circuit for cylinder 3. The PCM then uses this data to provide the right strategies for the fuel delivery and ignition timing of the engine.

Symptoms

Symptoms of a B0102 Audi A3 diagnostic trouble code may include:
  • If the DPF is not cleared the ECU will revert to the "Limp Home Mode" until the situation is corrected
  • Corroded or damaged connector
  • Reduction in engine performance, especially at low RPM levels
  • Malfunction Indicator Lamp (MIL) illuminated
Place of B0102 in engine

Possible Causes :

  • Fuel with a large percentage of sulfur will clog the DPF quickly
  • The Mass Airflow sensor will also cause this problem. Mass Airflow circuit malfunction.
  • Dirty air cleaner element Damaged DPF

Common Misdiagnoses

  1. Crankshaft Position Sensor Circuit Performance Problem
  2. TP Sensor Learn Not Complete Problem
  3. Low Coolant Circuit Problem
  4. Cruise Control System - Vehicle Accel Too High Problem
  5. Kick-Down Switch Failed Short Problem

Repair Processes :

Find out what kind of system you have and verify that voltage to the fuel level sensor is present at the fuel pump wiring harness. Replace the oxygen sensor that is downstream from the catalytic converter on the side of the engine that does not contain cylinder #1. Also, if a oxygen sensor code stating "heater circuit malfunction" the sensor has most probably failed. If you find a related TSB, the information will often help in diagnosing the code in question as TSBs are crested from many thousands of repairs.

Process Tips

Diagnostic trouble code B0102 Audi A3 is not difficult to diagnose and repair. Thus, it always pays to have a qualified technician to look after your vehicle should this error code arise.

Diagnosing this code requires the engine to be in good running shape, without unmetered air entering the engine. If other codes that relates to misfiring condition, lean running or air entering the engine is present, then you must first fix those error codes before B0102 Audi A3.

Fortunately, B0102 Audi A3 is a fairly common OBD code, meaning that it applies to all makes and models of vehicles made after 1996.

Diagnostic Trouble Code look-up and check engine light code viewer.

Copyright 2021 - https://diagnosticTrouble.com

Small Logo